For Vovlo VN VNL lflat cable there are have at least 3 different versions, Please check your size with ours before order!
Flat Heatseal conector to connect LCD to PCB, Almost always soldering required with special soldering.tool available in our web: https://www.inovauto.com/index.php/reparacao-auto/quadrantes-odometro-radio/dash-tools/rqf3532007-d5-1.html
:To install this Ribbon, you must use the T-Tip with at least a 40 Watt Iron. The T-Tip temperature must reach 100 Degrees Celsius; pressure must be applied in order for the Ribbon to heat seal to the board properly
problems such as lack of pixels, unreadable display, low contrast, tilted image, failure of illumination, etc
This item is for professional workshops, requires technical skill in Installation, if you don’t have it please don’t buy, Please you have to send First Photo of defective item, and return it later so we analyze if there’s Bad install or defective product.
INOVAUTO IS NOT RESPONSIBLE FOR ANY DAMAGE DURING INSTALATION, WARRANTY LIMITED AFTER SOLDERING OPERATION.